You must load a document and press the Start key to scan Pressing the Stop key causes the Continue Scanning dialog box to appear. If the Feed Option is enabled, the Start key lamp is lit. If the Feed Option is enabled, scanning is performed automatically whenever a sensor in the Document Feed Tray detects a loaded document, and pressing the Stop key causes the Continue Scanning dialog box to appear. If a Feed Option other than or is selected, once you have started scanning, each document placed in the Document Feed Tray is scanned, and when no document is loaded, the scanner enters the standby state. You must insert one page at a time to be scanned, and press the Stop key to display the Continue Scanning dialog box. If the Feed Option is enabled, the Separation Off key is lit and the Document Feed Tray is raised. When all of the documents have been scanned, the Continue Scanning dialog box appears. If the Feed Option is enabled, load your documents before scanning. You must load your documents as described below, depending on the specified Feed Option setting. Place your document and click to start scanning.Specify the file name and the file type for saving the image data.The Properties dialog box for the ISIS driver opens.įor more information on specifying the scan settings, see 'ISIS/TWAIN Driver Settings Dialog Box'. If you select in the ISIS driver properties dialog box, that setting is applied here. Select the default page size and click.If is not displayed in the list of scanners, you must re-install the ISIS/TWAIN driver. (XXXX varies depending on the model you are using) In Windows 8, CapturePerfect is saved to the following location. From the Windows task bar, click -> click -> ->.The procedure for using the Scan Batch to File function is described here as an example. This section describes how to start CapturePerfect 3.1 and scan documents.

Captureperfect 3.1 download windows 7